|
|
|
|
|
|
|
|
 平整光滑、整体无逢、不起尘、耐洗刷。
无毒、无挥发性物质，符合环保要求。
一次成膜的厚度可达1.5～3mm，不起壳、不龟裂。
在耐腐蚀、色彩丰富，装饰效果方面优于溶剂型环氧材料， |
|
|
|
 Smooth
& seamless, dust-proof and anti-washing
Non-poisonous up to the requirements of environmental
protection.
Thickness
of film forming with one coat(1.5-3mm)
Anti-corrosion, optional colors and decorative
effects better than solvent
epoxy.
|
| |
|
|
|
|
适用于医药工业、食品工业等卫生要求较高的建筑物地面。
适用于汽车工业、电子、仪表工业等防尘、防油、耐磨、耐冲击。
适用于有耐化学品腐蚀、抗酸、碱、盐要求的建筑物地面。
适用于装饰美观要求的公共建筑和民用建筑的艺术地面。 |
|
|
|
Floors
with higher sanitary requirements in pharmaceutical, food
industries.
Floors
requiring abrasion-resistance, antigrease & impact and
dustproof in
automobile, electronic and measuring
instrument industries.
Floors
with requirements for anti-corrosion.
Floors of
public and civil architecture with artistic
requirements. |
 |
|
|
施工温度应高于5℃，相对湿度小于75%，施工地面含水率不大于6%。水泥地面的平整度应高于一般的
水泥地面。
施工结束后应有两星期的养护期，冬季养护期要适当延长，在此期间地面不可接触腐蚀介质，不可接
触水，亦不可重物碾压。
|
|
|
|
The
conditions required for construction are air temperature above
5℃，
Relative humidity lower than 75%, relative moisture
content no higher than 6%
and a higher requirement for the
evenness of the floor.
Two weeks
of maintenance is required after the construction in winter,
the
period of maintenance needs to be extended, and water,
corrosive materials
and heavy loads must be prevented
from touching the floor during the
period.
| | |
