|
|
|
|
|
 适用于医药工业、食品工业等卫生要求较高的建筑物地面。
适用于汽车工业、电子、仪表工业等耐磨、耐冲击的建筑物地面。
适用于有耐化学品腐蚀、抗盐、抗弱酸、弱碱、要求的建筑物地面。
适用于防油、防水、防潮要求的建筑物地面、地沟等处。
适用于有装饰美观要求的公共建筑和民用建筑的地面。 |
|
|
|
 Floor
with higher sanitary requirements in pharmaceutical, food
industries.
Floors
requiring anti-impact and abrasive resistance in
automobile,electronic
and measuring instrument
industries.
Anti-corrosion of chemicals such as weak acid. weak
base and salt.
Trenches,
floors requiring grease & water proof and
damproof.
Floors of
public and civil architecture with artistic
requirements. |
|
|
|
施工温度应高于5C，相对湿度小于85%，施工地面含水率不大于6%。
产品含有易燃溶剂，因此在运输、施工、贮藏时应远离明火。配料及施工场地应有适当的通风条件。施
工期间应打开门窗通风，下班时应及时关闭。
为防止静电效应产生电火花，在使用高压无空气喷涂时应接地线。 |
|
|
|
The
conditions proper for construction are air temperature above
5C, relative
humidity lower than 85% and moisture content
not higher than 6%.
As it
contains inflammable solvent,flame should strictly be
prohibited when
stored, transported or in use. There
should be proper condition of air
circulation in mixing
room and in construction site. During operation, doors
and windows should be opened for air circulation but at
the end of each
operation, they should be closed in
time.
Electric
sparks may start because of static effect, so ground
connection is
required when the paint is
sprayed.
| | |
